Contract and Consulting Services

Home » Contract and Consulting Services
Contract and Consulting Services 2016-10-19T17:01:59+00:00

IEEE Consultants Database-1

Electromagnetic Contract and Consulting Services Offered by SiberSci, LLC:

SiberSci, LLC provides clients from any World Market with comprehensive short-term and long-term Electromagnetic Engineering Contract and Consulting Services that are customized to satisfy their individual technical requirements and time constraints.  To determine if SiberSci, LLC can be of assistance to your company, please provide Dr. Scott Best with a detailed specification and description of the work to be performed along with a schedule, and SiberSci, LLC will be happy to provide a quotation for the services that are required to fulfill the stated technical requirements.  A binding Non-Disclosure Agreement (NDA) is readily available to protect the business sensitive information, intellectual property, and proprietary information for each company to ensure their information is protected and not compromised.

The following abbreviated list of Electromagnetic Engineering Contract and Consulting Services are provided by SiberSci, LLC:

  1. Research, design, development, prototyping, fabrication, optimization, and manufacturing of Passive and Active RF, microwave, millimeter-wave, and Terahertz (THz) components, circuits, and systems.
    1. Microstrip, stripline, and coplanar waveguide filters, couplers, active and passive impedance matching networks, delay lines, baluns, transformers, antennas, transmission lines, and application specific circuits.
    2. Rectangular waveguide, cylindrical waveguide, coaxial waveguide, and elliptic waveguide filters, couplers, impedance matching networks, delay lines, baluns, transformers, antennas, transmission lines, and application specific circuits.
    3. Parabolic reflectors, corner reflectors, frequency specific standard gain horns, corrugated horns, dielectric lens, Lunenburg lens, Rotman Lens, Cassegrain, Inverse Cassegrain, spiral, patch, RFID Near-Field, RFID Far-Field, and application specific antennas.
    4. LDMOS, GaN, SiC , and GaAs power amplifiers, low-noise amplifiers (LNAs), and application specific amplifiers.
      1. Load-Pull Opimization of amplifier active device performance.
    5. Temperature stabilized GUNN diode oscillators.
  2. RF, microwave, millimeter wave and THz dielectric characterization of temperature dependent complex permittivity and permeability of gases, plasmas, powders, liquids, and solids.
  3. Research, design, development, and manufacturing of both industrial and commercial RF and microwave heating systems using solid-state amplifier oscillators/amplifiers and Vacuum Electronic Device (VED) oscillators/amplifiers.
  4. Plasma Engineering
    1. Research, design, development, and manufacturing of equipment for DC, RF, and microwave low temperature through thermal plasma generators and applicators.
    2. Plasma diagnostics and characterization using spectroscopic techniques, Langmuir probes, and laser interferometry.
  5. Research, design, development, and manufacturing of RF-MEMS and MEMS devices, circuits, and sensors.
  6. Research, design, development, and manufacturing of Point-to-Point microwave and millimeter wave circuits and systems for line-of-sight communications when fiber optic cable is not available for the application.
  7. Research, design, development, prototyping, fabrication, optimization, and manufacturing of Vacuum Electronic Devices (VEDs) for RF, microwave, and millimeter wave oscillators and amplifiers.
    1. Design, characterization, and life testing of oxide and dispenser cathodes.
    2. Research, design, development, prototyping, fabrication, optimization, and manufacturing of slow wave and fast wave circuits for VEDs.
    3. Research, design, development, prototyping, fabrication, optimization, and manufacturing of dielectric vacuum windows.
    4. Research, design, development, prototyping, fabrication, optimization, and manufacturing of X-ray sources.
    5. Research, design, development, prototyping, fabrication, optimization, and manufacturing of Ultra-High Vacuum (UHV) equipment.
  8. Research, design, development, and manufacturing of electrochemical fuel cells, characterization of electrochemical fuel cells using Electrochemical Impedance Spectroscopy, and numerical modeling of electrochemical fuel cells.
  9. Research, design, development, and manufacturing of RF and microwave linear accelerator electron and ion sources, cavities, couplers, beam diagnostics, impedance matching circuits, tuning circuits, and loads.
  10. Research, design, development, prototyping, fabrication, optimization, and manufacturing of RFIC and MMIC circuits and systems.
  11. Research, design, development, prototyping, fabrication, optimization, and manufacturing of microwave and millimeter-wave quasioptical components, circuits, and systems.
  12. Research, design, and development of theoretical, analytical, or numerical Computational Electromagnetic algorithms and codes for simulated interaction between electromagnetic waves (RF, microwave, millimeter-wave, THz, IR, optical, and UV) and materials.

In essence, SiberSci, LLC provides the following technical contract and consulting services to interested parties:

  1. Antenna Consulting – https://sibersci.com/antenna-consulting/
  2. Microwave Consulting – https://sibersci.com/microwave-consulting/
  3. Microwave Heating Consulting – https://sibersci.com/microwave-heating-consulting/
  4. Millimeter-Wave Consulting – https://sibersci.com/millimeter-wave-consulting/
  5. RF Consulting – https://sibersci.com/rf-consulting/
  6. RF Heating Consulting – https://sibersci.com/rf-heating-consulting/
  7. Terahertz Consulting – https://sibersci.com/terahertz-consulting/
  8. Vacuum Electronics Consulting – https://sibersci.com/vacuum-electronics-consulting/

Please contact Dr. Scott Best to discuss your contract or consulting project, and provide Dr. Scott Best with a detailed description of the work to be performed along with a schedule, and SiberSci, LLC will be happy to provide your company with a quotation for providing the services that are required to fulfill the stated technical requirements.